Website is currently under construction. Any orders placed through this store will not be honored or fulfilled.

Welcome to CompoExpress!

Lakduino UNO Rev4 (Arduino Compatible)

Be the first to review this product

Availability: In stock

US$ 22.35

Quick Overview

Lakduino UNO Rev4


Supports Windows 8

More Views

  • Lakduino UNO Rev4 (Arduino Compatible)
  • Lakduino UNO Rev4 (Arduino Compatible)
  • Lakduino UNO Rev4 (Arduino Compatible)
  • Lakduino UNO Rev4 (Arduino Compatible)

This is the new Lakduino UNO Rev4 which is compatible with the popular Arduino UNO. In addition to all the features of the previous version, the Lakduino UNO Rev4 now comes with Windows 8 supported USB driver chip on board so that you don’t have to get busy with external connections for uploading your sketches.  Simply download the drivers for the Prolific USB-to-Serial comm port and you are ready to use it with the Arduino IDE. The UNO Rev4 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Lakduino UNO Rev4 works with all existing shields but can adapt to new shields which use these additional pins. With new onboard SMD LED’s and resettable fuse added for USB over-current protection and the Original standard PCB quality, the new Lakduino UNO Rev4 is no shorter in quality and class. 

The Lakduino UNO Rev4 can be programmed over a USB Mini-B cable using the Arduino IDE: Just plug in the board, select the appropriate Comm Port from the Tools menu and you're ready to upload code. Lakduino UNO Rev4 has all of the hardware peripherals you know and familiar with: 14 Digital I/O pins with 6 PWM pins, 6 Analog Inputs, UART, SPI and external interrupts. You can power the Lakduino UNO Rev4 over USB or through the barrel jack. The on-board power regulator can handle anything from 6.5V to 15VDC.

- All Lakduino Branded products are subjected to 6 months of service warrenty. 


Features 
- Microcontroller : ATmega328
- Operating Voltage : 5V
- Input Voltage (recommended)  :  7V-12V
- Input Voltage (limits)   :  6.5V-15V
- Digital I/O Pins :  14 (of which 6 provide PWM output)
- Analog Input Pins   :   6
- DC Current per I/O Pin  : 40 mA
- DC Current for 3.3V Pin : 50 mA
- Flash Memory :  32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM  :  2 KB (ATmega328)
- EEPROM  :  1 KB (ATmega328)
- Clock Speed   : 16 MHz

PL2303 Driver Installation and getting started with your Lakduino UNO Rev4



-  Plug in your Lakduino UNO Rev4 to an available USB Port on your PC using the provided USB mini B cable.PL2303 Driver Installation and getting started with your  Lakduino UNO Rev4
- If the Prolific USB-to-Serial comm device is not recognized and drivers are not loaded automatically please follow the link to download and install drivers manually
- After device installation right click on My Computer and select Properties to open the window System Properties
- Under the System Properties window select the tab Device Manager and open the tree for Ports (COM & LPT) and make note of the Prolific USB-to-Serial comm (COM xx). For example (COM 4)

 
- Download and Install the freely available Ardunio IDE software, follow the link for the same if not installed
- Run the Arduino IDE software and click on the menu Tools > Serial Port and select the previous comm port.
- Now you’re ready to upload your favorite sketch.

Package Includes
- Lakduino UNO Rev4
- ATMega328P-PU microcontroller with Optiboot bootloader
- USB Mini Cable

More information
About Arduino UNO
Download Arduino IDE
Lakduino Rev4 Driver for USB connectivity
Lakduino Rev3 Driver for USB connectivity

SKU ALTLKD01

Use spaces to separate tags. Use single quotes (') for phrases.


Write Your Own Review

Only registered users can write reviews. Please, log in or register